Sovol 2 Rolls Filament Dehydrator Spool Holder Filaments Dry Box for 1.75mm, 2.85mm ABS PLA PETG TPU FDM Material 3D Printer

Sovol SH01 Spool Holder Filaments Dryer Box for 1.75mm 2.85mm PLA PETG TPU ABS Keeping Dry Filament Dehydrator FDM 3D Printing

Sovol Filament Dryer is designed for drying filament, it is able to remove the moisture from the filament and restore the good printer quality of filament. As we all know, the filament is easy to absorb the moisture in the air, after the filament get humid, you may have the print issue such as strings, bubbles, uneven extrusion lines and unable to get good print quality no matter how perfect is your printer. Even the hot end may get clogged, that is really disppointing. Therefore, the filament dryer, is very essential for every 3d printer owners. For such an important accessories, we gave it more better features as we can.

Large Capacity:

Compared to other filament dryer, Sovol filament dryer can store 2 spools filament with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Which is a very good news for 3d printer owners, it satified more people who have more different demands, like people who usually print with 2 KG/ Roll, people who have two or more single extruder 3d printer, people who have IDEX 3d printer.

Adjustable Temperature & Time:

The temperature and time both are adjustable, when you hit the function button , you can set the temperature 40 c, 45c or 50c, hit up button to adjust the temp. When you hit the function button again, you can set the time from 6h to 12 h, hit the up botton, you can adjust the drying time.

Humidity Display:

The humidity will show the humidity of the filament dryer box real-time, it is very convenient for users to take a reference about the humidity of the filament.

Excellent Sealing Storage Function:

There is a transparent silicone spacer in the edge of the box, after you lock the lid and close the 2 teflon outlets, the filament can be stored in an vacuum enviroment for a long time, no need power on. We suggest you put 4 bags of desciccants (not included in the package) inside the dryer box to improve drying efficience & quality.

Two Teflon Outlets:

There are two outlets made with teflon material, which makes the filament be loaded more smooth from the filament dryer to the extruder. And when you use the filament dryer for storing filament, you can close these two outlets, when you use it for drying, you can open it for letting the moisture flow out to the air. It is a little design, but make the product much special.

Two Locking Clips:

Two locking clips can lock the lid very tight, and gurantee that lip won’t pop up because of the pull strength of extruder when it is printing . You can use the filament dryer as a filament holder and print without any worries.